MultiGips MP 100 leicht
For all normal interior rendering bases. Maximum yield.
High-grade, factory premixed dry mortar on the basis
of gypsum and lightweight aggregates for the economic working using the
plastering machine. Produces a very light, single-layer internal plaster for
all normal rendering backgrounds, also in domestic kitchens and bathrooms in
accordance with DIN V 18550. Through the low weight the plaster is also ideally
suitable for modern particularly light wall creators such as pore matrix
concrete or porous brick. Due to its special composition it has a large pore
volume and with this improves the thermal and acoustic insulation.
MultiGips MP 100 Leicht produces a background capable of load carrying for subsequent coatings and is characterised by particularly good non-sag properties as well as an even bonding process. The high, water retention capacity and the sufficient slurry guarantee an ideal working with smoothed surfaces.
With weak or non-absorbent concrete surfaces, apply MultiGips Betonkontakt before the rendered MultiGips. Treat extremely absorbent rendering bases or mixed brickwork beforehand using MultiGips Aufbrennsperre or MultiGips Grundiermittel.
Duration of working
approx. 3 hours
approx. 0.80 kg/m² per mm layer thickness
Wet mortar yield
ca. 126 l/100 kg
Thickness of plastering
Single-layer 10 - 25 mm
30 kg-sacks with moisture protection; Pallet with 40 sacks = 1,200 kg;
delivery also loose in building site container or silo vehicle
approx. 3 month, dry
* Values can deviate depending on background, ambient temperature and working conditions.
Product details, working notes, background pre-treatment and all technical data
Safety data sheet download (28k)